Ex: Metric limits and fits
In this exercise we will practice using the ANSI B4.2-1978 (R2004) Standard to determine limits.
You will need the ANSI limits and fit tables found in the Appendix of your book to complete this exercise.
Determine the limits, tolerance, type of fit, and type of system for a n30 H11/c11 fit.
| Shaft | Hole | Check | |
|---|---|---|---|
| Limits | Min. Max. | Min. Max. | |
| Tolerance | |||
| System | |||
| Fit | |||
Determine the limits, tolerance, type of fit, and type of system for a n30 P7/h6 fit.
| Shaft | Hole | Check | |
|---|---|---|---|
| Limits | Min. Max. | Min. Max. | |
| Tolerance | |||
| System | |||
| Fit | |||