Supplemental Problems
Supplemental Problem 1: Write the thread notes for the following external threads. Also, what are the minor diameter and the pitch? Thread class = 2. Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | 7/16 | |
| Thread series | Coarse | |
| Thread note | ||
| Minor diameter | Round to 3 decimal places | |
| Pitch | Round to 3 decimal places |
Supplemental Problem 2: Write the thread notes for the following internal threads. Also, what are the tap drill size and/or diameter and the pitch? Thread class = 3. Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | 9/16 | |
| Thread series | Fine | |
| Thread note | ||
| Tap drill diameter | ||
| Pitch | Round to 3 decimal places |
Supplemental Problem 3: Write the thread notes for the following threads. Also, what is the major diameter in inches? Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | #3 | |
| Thread series | Coarse | |
| Thread note | ||
| Major diameter in inches |
Supplemental Problem 4: Write the thread notes for the following external threads. Also, what are the minor diameter and the number of threads per mm? Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | M33 | |
| Thread series | Fine | |
| Thread note | ||
| Minor diameter | ||
| # of Threads per mm |
Supplemental Problem 5: Write the thread notes for the following internal threads. Also, what are the tap drill size and/or diameter and the number of threads per mm? Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | M24 | |
| Thread series | Coarse | |
| Thread note | ||
| Tap drill diameter | ||
| # of Threads per mm | Round to 3 decimal places |
Supplemental Problem 6: Fill in the given table for a hex head bolt with the following major diameters. Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | 3/4 | |
| Width across the flats | ||
| Max. width across corners | Round to 3 decimal places | |
| Head height | Round to 3 decimal places | |
| Normal clearance hole |
Supplemental Problem 7: Fill in the given table for a hexagon (socket) head cap screw with the following major diameters. Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | 7/8 | |
| Max. head diameter | ||
| Max. head height | ||
| Normal clearance hole | ||
| Counterbore diameter | ||
| Counterbore depth |
Supplemental Problem 8: Fill in the given table for a slotted flat countersunk head cap screw with the following major diameters. Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | 1 inch | |
| Max. head diameter | ||
| Max. head height | ||
| Normal clearance hole | ||
| Countersink diameter | ||
| Max. Countersink angle | degrees |
Supplemental Problem 9: Fill in the given table for a hex head bolt with the following major diameters. Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | M8 | |
| Max. width across the flats | ||
| Max. width across corners | ||
| Max. head height | ||
| Thread length for a screw that is shorter than 125 mm | ||
| Normal clearance hole |
Supplemental Problem 10: Fill in the given table for a socket head cap screw with the following major diameters. Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | M14 | |
| Max. head diameter | ||
| Max. head height | ||
| Normal clearance hole | ||
| Counterbore diameter | ||
| Counterbore depth |
Supplemental Problem 11: Fill in the given table for a flat countersunk head cap screw with the following major diameters. Click the "Submit Answers" button to check your answers.
| Enter Answer | Check | |
|---|---|---|
| Major diameter | M20 | |
| Max. head diameter | ||
| Max. head height | ||
| Normal clearance hole | ||
| Countersink diameter | ||
| Countersink angle | degrees |