BOOKS

Home

Engineering Graphics Essentials 4th Ed.

Engineering Graphics Essentials 3rd Ed.

Engineering Graphics Essentials 2nd Ed.

Engineering Graphics Essentials with AutoCAD 2012 Instruction

Engineering Graphics Essentials with AutoCAD 2011 Instruction

Engineering Graphics Essentials with AutoCAD 2010 Instruction

Engineering Graphics Essentials with AutoCAD 2009 Instruction

Engineering Graphics Essentials with AutoCAD 2008 Instruction

Engineering Graphics Essentials with AutoCAD 2007 Instruction

Introduction to CATIA V5R19

Introduction to CATIA V5R17

Introduction to CATIA V5R16

Introduction to CATIA V5R12

Catia 16

Introduction to CATIA V5 Release 16

A Hands-On Tutorial Approach

This book is a collection of tutorials meant to familiarize the reader with the mechanical design workbenches that are available in CATIA. The reader is not required to have any previous CATIA knowledge. The workbenches covered in this book are; Sketcher, Part Design, Wireframe and Surface Design, Assembly Design, and Drafting. Preceding each tutorial is a brief description of the workbench, toolbars, and commands to be used and focused on within the tutorial. This book is not meant to be strictly a reference book. It is meant to enable the reader to get right into CATIA and start drawing. You will learn by doing. The author directs the reader to CATIA’s Companion for in depth reference material and a more detailed description of the commands.

Link to SDC publishing

Table of Contents

  1. CATIA Basics
  2. Sketcher
  3. Part Design
  4. Wireframe and Surface Design Fundamentals
  5. Assembly Design Fundamentals
  6. Drafting Fundamental